OSRAM SMART+ wall switch setup

1. Choose the right WiFi network

  • Make sure your phone is connected to a 2.4 GHz WiFi network (2G)
  • The throughput of the 5 GHz network is lower and loads the operating network.

Settings -> Wi-Fi -> Select network connection


2. Automatic deployment (recommended)

Turn on the power at the wall switch (at the back, under the on/off cover)

  • The new wall switch will automatically be in pairing mode when it is turned on. (The switch indicator light will flash slowly)


Do this:

  1. Open the SMART+ app (create a username if you don't already have one)
  2. Go to the room or view where you want to add the switch
  3. Press “+”
  4. Select “Add device”
  5. Select “Start automatic search” (The application will search for nearby devices.)
  6. Select: “Add” (single device) or “Add all” if there are multiple devices
  7. Select WiFi network (2.4 GHz) and enter password

Once the switch is connected, you will see a notification: “Device added successfully”

 

3. Manual deployment (if automatic does not work)

If the device is not found automatically, you can add it manually.

1. Put the switch into pairing mode

  • Press and hold the main switch button for about 10 seconds
  • The indicator light starts flashing slowly.

Note:

  • 1-button: single button
  • 2-button: left button
  • 4-button: top left corner

2. Add the device in the app

  • Open the app and press “Add device”
  • Select “Add manually”
  • Select:
    • WiFi
    • Wall Switch
  • Confirm that the light is flashing slowly

 

3. Connect to a 2.4 GHz WiFi network

  • The app asks to connect the phone to the switch's WiFi network
  • Go to your phone's WiFi settings and connect to this network
  • Select WiFi network (2.4 GHz) and enter password

When the search is complete, you will receive a notification: “Device added successfully”

 

4. Using the switch

Once the switch is added:

  • Tap its icon in the app
  • You can control lights or other connected functions

Press functions

The switch can be assigned different functions for different presses:

  • One press – quick press
  • Double press – two presses in a row
  • Long press – press for more than 2 seconds

These can be used for example:

  • lights on/off
  • for changing lighting conditions
  • automations (“Tap to perform”)

 

5. Switch reset

If the switch needs to be reactivated:

  1. Press the main button for about 10 seconds
  2. The indicator light starts flashing → the device has been reset
  3. Re-deploy from scratch

 

OSRAM

If you need help with commissioning, designing automations, or implementing a larger smart lighting system, Tammiston valaisin is happy to help – we sell the products, provide advice, and install the entire system if necessary.

Ota yhteyttä / Pyydä tarjous